<noscript id="qoi4z"></noscript>
    1. <mark id="qoi4z"></mark>
      1. <nav id="qoi4z"><optgroup id="qoi4z"></optgroup></nav>
        <nav id="qoi4z"><listing id="qoi4z"></listing></nav>
      2. <wbr id="qoi4z"></wbr>

        Language: Chinese line English

        centrifugal fan

        • 4-72 centrifugal fan - copy - copy - copy
        • 4-72 centrifugal fan - copy - copy - copy
        4-72 centrifugal fan - copy - copy - copy4-72 centrifugal fan - copy - copy - copy

        4-72 centrifugal fan - copy - copy - copy

        • 4-72
        • 4-72 centrifugal fan
        • 4-72 centrifugal fan
        • 4-72 centrifugal fan
        • Product description: The main use of 4-72 type centrifugal fan for indoor ventilation in general factories and large buildings or the air transport and other non flammable, explosive, volatile, the human body harmless gas
        • INQUIRY
        The main use of 4-72 type centrifugal fan for indoor ventilation in general factories and large buildings or the air transport and other non flammable, explosive, volatile, the human body harmless gas corrosion of steel; B4-72 type centrifugal fan can discharge flammable, volatile gases; F4-72 centrifugal fan is mainly used for conveying corrosive gases. However, 4-72, B4-72, F4-72 centrifugal fan conveying gas are not allowed to contain viscous substances, containing dust and hard particles are not more than 150mg/m3, the gas temperature shall not exceed 80 degrees C.
        The performance of B4-72 type fan with optional part and foundation of size and 472 type, can be selected according to the sample. The fan structure is basically the same with the 4-72 type motor, No. 2.8A - 6A with B35 type flange and foot, No. 6 - 12C, D and Y series motor selection table corresponding to the YB series, the installation type is B3.
        F4-72 type centrifugal fan is made of stainless steel, glass fiber reinforced plastic or other corrosion resistant materials, the performance and the size of the foundation are the same as that of the 4-72 centrifugal fan.
        4-72 type centrifugal fan fan is first used in China, but also the most common fan, from high-rise buildings and underground railways, boiler blast to plant ventilation, from the northern border to the South China Sea, from the western plateau to the east side down, 4-72 fans everywhere.

        type


        From one end of the motor face, where the impeller clockwise rotation are known as "right whirlwind machine" to "right", otherwise, it is called "left whirlwind machine" to "left".
        The fan outlet position in said casing outlet angle, 4-72 fan no 2.8 - 6 in the factory are made of a type, the use of units according to requirements to install into the desired position, in order to indicate. The No. 2.8 outlet position adjustment range is 0 degrees, 225 degrees, the interval is 22.5 degrees; No. 8 - 12 outlet adjustment range is 0 degrees, 225 degrees interval is 45 degrees; No. 16, the 20 air outlet angle made of three kinds of fixed 0 degrees, 90 degrees, 180 degrees, can not be adjusted, specify when ordering.
        A, B, C, D four kinds of transmission mode of fan: 4-72 fan, No. 2.8 - 5 by A transmission, No. 6 is A type transmission and C transmission, No. 8-12 by C, D two kinds of transmission mode, No. 16-20 using B type transmission.
        If the machine number, transmission mode, outlet angle can not meet the needs of your production, our factory has the ability to transform or design for you until you are satisfied.
        structure
        4-72 type centrifugal fan No. 2.8 - 6A is mainly composed of impeller, casing, air inlet, motor and other components. No. 6C and No. 8 - 20 in addition to the structure, and the transmission part.
        The impeller consists of 10 inclined - turbine airfoil blade, curved and flat wheel cover plate, steel (aluminum alloy B4-72) produced by the static and dynamic balance correction and overdrive experiment, high efficiency, stable and reliable operation, good performance of air.
        A - made of two different types, including: No. 2.8 - 12 chassis as a whole, they cannot be separated. No. 16 - 20 housing made of three open, in addition to the level divided into two parts, the upper part along the vertical center line is divided into two halves, connected by bolts, so that the installation and maintenance into or out of the impeller.
        The air inlet is made into an integral structure which is arranged on one side of the fan, and the cross section parallel to the axial direction is a curved shape.
        Transmission - composed of spindle, bearing box, rolling bearing, pulley or coupling.
        Performance and selection

        The sample was given No. 10 prototype dimensionless performance table and dimensionless performance curve, a number of other machine dimensional performance parameters can be deduced

        1

        2

        3

        4

        5

        6

        Φ

        Ψ

        Ψd

        λ

        ηin

        0.1884

        0.458

        0.0335

        0.0995

        0.867

        0.2051

        0.452

        0.0397

        0.1045

        0.887

        0.2218

        0.434

        0.0465

        0.1082

        0.89

        0.2361

        0.413

        0.0528

        0.1106

        0.882

        0.25

        0.39

        0.594

        0.1126

        0.866

        0.2637

        0.363

        0.0663

        0.1137

        0.842


        Scan the qr codeClose
        the qr code
        welcome快盈